Documentation

SmarTek Systems
Sensing and System Integration Solutions

Documentation

User Manuals

SAS-1   The latest user manual covering all the features included in the SAS-1 to date.
       A. SAS Intro and Background.pdf
           AA. SAS1_Section_List.pdf
        B. SAS1_Specs_and_Service.pdf
        C. Architecture_and_Op_Modes.pdf
        D. Unpack_and_Quick_Checkout.pdf
        E. Installation_at_Site.pdf
                     SAS-CT Rev 2.4 Wiring details
                     SAS-1 Mounting Modification Memo dated July 19, 2006
                     Elevated SAS-1Mount Illustrated
      F. Setup Using SAS Monitor
        G. SAS-1 Detailed Communication Formats
        H. SAS Relay Interface Configuration And Connection
         I. SAS-1 Wireless Configuration and SAS-RI to CT-RFM Connections (Cable diagrams)
        J. SAS-1 Cable Diagrams
        K. SAS-1 Based Truck Roll Over Warning System
        Y. Communications Via Internet
             Instructions for how to use the SAS-1 Archive Function to obtain PRN format count data.
Previous Versions of the User Manual
         SAS-1 User Manual for users with Software Versions 1 and 2.

SVS-1 The latest user manual covering the architecture and features of our video detection technology.
         A. SVS-1 System Overview
         B. SVS-1 Using SVS Monitor
         C. SVS-1 System Wiring

HiWayVU Software

The latest version of HiWayVu can be configured for individual applications as specified by individual user needs. The basic program will not run with out configuration and input files which are supplied on a case by case basis.

DeviceServer1 User Guide

Cabinet WatchDog User Guide

Catalog Cut Sheets And Brochures
      SAS-1 Catalog Sheet
      T-Box Catalog Sheet
      SAS Relay Interface
      SAS-RFM 2.4 GHz Radio Modem
      SAS-CT Cabinet Termination
      SAS-JB Junction Box
      Cabinet Watchdog

The Latest Version of SAS Monitor and Setup
The software necessary to set up the SAS-1. This is a one file executable for a full installation of Version 7 of the SAS-Monitor Program. Please call or email us with requests for any firmware updates for the SAS-1 Sensor itself. . SAS_Monitor_V7 provides a means of resolving SAS-1 sensors' addresses associated with URL names rather than IP addresses. Enter either URL or an IP address and port number when connecting via a network connection to start communicating with SAS-1 at a known address.

Calibration Verification Method Recommendation
To reduce the time required for sensor speed and count verification, we recommend a probe vehicle approach to multi-lane highways rather than try to sample individual vehicles using a radar gun. Calibration memo.

As a supplement to the new manual published above, quick pull outs explaining specific activities now available with the SAS Monitor program, such as setting the individual lane sensitivity is covered in Setting_SAS_1_Lane_Sensitivity_11_16_2001.ppt. The procedure for setting up the sensor to collect and archive data is outlined in SAS_1_Archive_Setup_and_use_11_17_2001.ppt.

Communications Protocols
    SAS_COMM_Formats_11_20_2001.DOC has been superseded by SAS-1 Detailed Communication Formats listed as Chapter G in the User Manual above.
   T-Box Communication Protocol -- Please contact us for latest protocol. Two files are required.
    Video Switch Pin-out and Control

Applications and Integrated Solutions

White Papers
    The Economy of Multi-Station Highway Monitoring Using SAS-1 in a Wireless Multi-Point Network
          or in Adobe.PDF format
    Wireless Remote Monitoring for Workzone, ITS, or Traffic Signal Control
    Using SAS-1 as a On-ramp Wrong Way Detector or in Adobe.PDF format
    Using SAS-1 as for system or advance detection at intersections illustrated

Test Results
   Comparison to Speed Trap Data on I-17, Phoenix Arizona Construction Zone (25 Jan 2000 Morning CRUSH hour with significant time periods at less than 20 MPH). Raw data file for the curious--an ASCII text log file.
    SAS1_Stop_and_Go_Performance_Comparison.PDF
    sas1_rush_hour.pdf
    tst_0598.pdf and Visual Imaging
    NY DoT Integration Test For Corning ITS Project (Adobe.pdf)

SAS-1 Set Up Procedures and Helpful Hints
   SAS connection options        Connector Cable Pin-outs
    SAS_ARCHitecture.PDF
    SAS-1 Installation Geometry Recommendations
    Frequently Asked Questions about the SAS-1

Have you seen the SAS-1 Frequently asked Question Page? Still have questions? Send us an e-mail.
SmarTek Systems, Inc Standard Terms and Conditions of Sale and Warranty Information

This page was last modified 06/08/2009 .